Rivakka products Hammer mills - Silo mill with an auger fitting

rivakka_spiraalisovituksella.jpg

Tuotekuvat_ISOT_640x320.jpg

Silo mill with an auger fitting

The mill suctions grain and grinds it into the silo under the mill, then the auger takes the feed from the silo to the feeder. A 4-way divider can be attached to the suction side, in which case the feeder controls the divider's functions and grinds each grain batch in the feed mixture separately. The mill functions under the direct control of the feeder, thus the feed is always fresh and unsorted. Rivakka silo mill's technical solutions also allow for the milling of pure oats. The mill also functions flawlessly when used with hermetically stored grain.

TECHNICAL DATA

  Motor:  SRK 11 kW
Length 178 cm
Width: 92 cm 
Height: 220 cm 
Height with dust bags: 370 cm
Milling capacity: 600 - 2000
Suction power: 2 x 20 m 
Motor: SRK 15 kW
Length: 178 cm
Width: 92 cm 
Height: 220 cm 
Height with dust bags: 370 cm 
Milling capacity:700 - 2200
Suction power: 2 x 20 m 
Motor:SRK 22 kW
Length: 178 cm
Width: 92 cm 
Height: 265 cm
Height with dust bags: 370 cm
Milling capacity:800-2800
Suction power: 1 x 100mm /20m